Oil & Gas
Oil & Gas WITH METSOURCE
The Oil & Gas market demands products that perform in extremely severe environments operating well beyond Industry standards. MetSource has supplied numerous products to the Oil & Gas market including pump & valve components, LNG transport and metering components, reactor rings, gas production components.
- 300 Series Austenitic grades
- 400 Series Martensitic grades
- 2205, 2507, 2706 Duplex Grades
- 14-4PH, 15-5PH, 17-4PH
Nickel- and Cobalt-Based
- IN600®, IN625®, IN718®
- Hastelloy C-276®, Waspaloy®
- Nitronic® 60
- 254 SMO®, Ferallium 255®
- C93200 to C94500
- C95200 to C95400
- C95500 to C95800
- Bearium® Metals
Ferralium® is a registered trademark of Langely Alloys for a super duplex stainless steel alloy
Inconel® is a registered trademark of Special Metals Corporation for a family of austenitic nickel-chromium based superalloys
254 SMO® is a registered trademark of Avesta Sheffield for a an austenitic stainless steel with molybdenum addition
Bearium® is a registered trademark of MetalTek International
Nitronic® is a registered trademark of AK Steel Corporation (Armco Steel) for a series of alloys with the addition of Nitrogen
Hastelloy® is a registered trademark of Haynes International for a series of corrosion-resistant alloys
Waspaloy® is a registered trademark of Haynes International for a nickel-based superalloy
Centrifugal Quality Standards
(Pressure Equipment Directive)
Do you have a complicated machined hog-out or fabrication that may lend itself to conversion to an alternate process? Nearly all of MetSource’s success stories are centered around converting a product from one process or multiple processes to a streamlined manufacturing process that improves the product quality, cost and / or lead-time.
Material Process Selection
Do you have a part design but want a solutions expert to advise optimal process to produce your part? Subtle changes in part design can optimize process manufacturability to reduce cost, increase part quality and / or increase throughput.
Do you want to speak to a metallurgist regarding a part and environment to help with material selection? Alloy selection can greatly affect overall cost and part manufacturability.
On-Site Visit and / or Phone Consultation
Do you wish to have a MetSource engineer call or visit you to discuss a particular application?